General
Bar code | Model | Power (W) | Color Temperature (K) | Light (lm) | Dimmable | Frame color | Nominal Voltage |
---|
5420069505905 | SP-3012-ND-045-CW-01 | 45 | 6000 | 4310 | No | White | 230 |
5420069505912 | SP-3012-ND-045-NW-01 | 45 | 4000 | 4208 | No | White | 230 |
5420069505929 | SP-3012-ND-045-WW-01 | 45 | 3000 | 3870 | No | White | 230 |
5420069504281 | SP-3012-ND-045-CW-01 | 45 | 6000 | 4310 | No | Silver | 230 |
5420069504298 | SP-3012-ND-045-NW-01 | 45 | 4000 | 4208 | No | Silver | 230 |
5420069504304 | SP-3012-ND-045-WW-01 | 45 | 3000 | 3870 | No | Silver | 230 |
As an
alternative, one of the products below might beter suit your needs:
Service life is defined based on the following parameters:
L80 LED brightness loss
B10 breakdown rate
Electrical
Electrical Specifications
This lighting element operates with a wide range of input voltage, from 80-280V.
Voltage Range | 85-277V AC |
Frequency Range | 50-60Hz |
Power Factor | >0.9 |
Factory testing | Tested at 280V during 8h continuously, 8h on/off, 8h continuously |
Mechanical
Mechanical specifications
Socket Type | Connection with WAGO terminal blocks |
Dimensions (mm) | 295*1195*10 |
Weight (g) | 4240 |
IP Rating | IP20 |
Working Temperature (Degree Celsius) | -25... +45 |
Cover material | Polycarbonate |
Body Color | Grey or White |
Body material | aluminium |
Painting type | Solvent Free Powder Coating |
Packaging: pcs / box | 4 |
Lighting
Lighting specifications
Lighting Angle (Degrees) | 160 |
Color rendering index (RA) | >80 |
LEDSource | Epistar 4014 SMD LED 0,2W / LED |
The photometric files (.IES type) are available in the Download tab on the product webpage (www.Qaledo.com).
Installation
Installation of the luminary should only be executed by qualified technicians.
Mechanical installation
There are 3 possibilities to install the panels:
- as a recessed light in a "false ceiling" with a grid of the size of the panel
- on the ceiling with the help of an extra frame accessory (accessory also available from our Qaledo brand)
- hanging the panel with a set of wire fixtures (accessory also available from our Qaledo brand)
In case of using it in a false ceiling with light weight tiles, the panel should only replace one of the tiles.
Normally the weight of the panel should be no issue for the structure of the ceiling, but the qualified technician should evaluate the local situation.
Electrical installation
The LED driver included in the package should be connected to the lamp with the delivered plugs. After inserting the driver plug into the plug of the luminary, the connector should be twisted to lock the connection.
Next, the driver should be connected to the mains by the mean of the WAGO connectors included in the package. To do that, the WAGO connector orange handle should be flipped up, the driver wire should be inserted in the hole and the WAGO connector orange handle should be flipped back to close position.
Similarly, the 2 wires of the mains should be connected in the other hole of each of the 2 connectors.
In case of dimmable version, depending on the type of dimmer, the instructions provided by the dimmable driver should be followed.
Applications
Application examples
Downloads
Please click on the button next to the desired file to download it.
IES files
SP-3012-ND-045-NW_IESNA2002.IES | |
SP-3012-ND-045-WW_IESNA2002.IES | |
Certificates
LVD_REP_SP.pdf | |
ROHS_CERT_SP.pdf | |
LVD_CERT_SP.pdf | |
ROHS_REP_SP.pdf | |
EMC_CERT_SP.pdf | |
EMC_REP_SP.pdf | |
Product picture(s)
paneel30x120.jpg | |
Accessories
In order to use this model,
please don't forget to select one of the following item:
The following
accessories are available :