General
| Bar code | Model | Power (W) | Color Temperature (K) | Light (lm) | Dimmable | Body color | Nominal Voltage |
|---|
| 5420069505363 | RP-007-ND-CW-01 | 7 | 6000 | 535 | No | White | 230 |
| 5420069505387 | RP-007-ND-NW-01 | 7 | 4000 | 505 | No | White | 230 |
| 5420069505394 | RP-007-ND-WW-01 | 7 | 3000 | 496 | No | White | 230 |
| 5420069506414 | RP-007-ND-CW-01NB | 7 | 6000 | 535 | No | Brushed Nickel | 230 |
| 5420069506421 | RP-007-ND-NW-01NB | 7 | 4000 | 505 | No | Brushed Nickel | 230 |
| 5420069506438 | RP-007-ND-WW-01NB | 7 | 3000 | 496 | No | Brushed Nickel | 230 |
As an
alternative, one of the products below might beter suit your needs:
Service life is defined based on the following parameters:
L80 LED brightness loss
B10 breakdown rate
Electrical
Electrical Specifications
This lighting element operates with a wide range of input voltage, from 80-280V.
| Voltage Range | 85-277V AC |
| Frequency Range | 50-60Hz |
| Power Factor | >0.95 |
| Factory testing | Tested at 280V during 8h continuously, 8h on/off, 8h continuously |
Mechanical
Mechanical specifications
Very robust structure, made of aluminium body. Easy to fix in false ceilings. The hole in the ceiling must be 100mm.
| Socket Type | Connection with WAGO terminal blocks |
| Dimensions (mm) | 115*115*20 |
| Weight (g) | 305 |
| IP Rating | IP44 |
| Working Temperature (Degree Celsius) | -25... +45 |
| Cover material | PMMA (Polymethyl Methacrylate) |
| Body Color | White or brushed nickel |
| Body material | aluminium |
| Painting type | Solvent Free Powder Coating |
| Packaging: pcs / box | 40 |
Lighting
Lighting specifications
| Lighting Angle (Degrees) | 140 |
| Color rendering index (RA) | >80 |
| LEDSource | Epistar 2835 SMD 0,2W LED |
The photometric files (.IES type) are available in the Download tab on the product webpage (www.Qaledo.com).
Installation
Installation of the luminary should only be executed by qualified technicians.
Mechanical installation
The recessed Round panel can easily be installed in false ceilings due to its low height.
A hole should be made in the ceiling following the dimensions indicated under the section "Mechanical specifications"
The size of the hole should be between the inner and the outer diameter of the luminary - as indicated on the diagram.
Electrical installation
Once the hole is made, the lamp can be connected. For that, first the driver box included in the package should be connected to the lamp with the delivered plugs. After inserting the driver plug into the plug of the luminary, the connector should be twisted to lock the connection.
Next, the driver should be connected to the mains by the mean of the WAGO connectors included in the package. For that, you have to open the connector by flipping the orange handle, than insert the driver wire in the hole and close the connector by flipping back the orange handle. Similarly, the mains connector should be connected in the other hole of the connector.
Applications
This lamp is ideal for lower ceilings up to 3 meters. Thanks to the wide beam angle, the space is very beautifully illuminated. The lighting makes the room look bigger because of the light from the floor to the ceiling, where the traditional downlight rather gives a spotlight effect.
With higher ceilings normal downlight is a better choice.
Below are a few examples of using these lights in the bathroom of a public building.
Downloads
Please click on the button next to the desired file to download it.
IES files
RP-07-ND-WW-01_IESNA2002.IES |  |
RP-07-ND-NW-01_IESNA2002.IES | |
Product picture(s)
PP_DD.jpg | |
Energy Label
en-GB-68-RP-007-ND-CW-01.png | |
en-GB-68-RP-007-ND-NW-01.png | |
en-GB-68-RP-007-ND-WW-01.png | |
Accessories
The following
accessories are available :
